Nikon Digital Camera Reviews

Nikon Digital Camera Reviews

Showing posts with label zeikos. Show all posts
Showing posts with label zeikos. Show all posts

Zeikos ZE-NBG300 Battery Power Grip for Nikon D300 & D700

Buy Cheap Zeikos ZE-NBG300 Battery Power Grip for Nikon D300 & D700


Buy Low Price From Here Now

The Zeikos Power grip for the Nikon D300 is the perfect solution for doubling your shooting time. It holds either 2 EN-EL3E Lithium-Ion Rechargeable batteries or 6 AA batteries. It has a vertical firing release with a lock and dramatically improves stability. It has a 1 year warranty.
Readmore

Technical Details

- Professional high quality battery grip for Nikon D300
- Effectively doubling your shooting time
- Holds 2 EN-EL3E Li-Ion rechargeable Batteries
- Complete with holder for 6 AA Batteries
- Vertical firing release with lock
See more technical details
Customer Buzz
 "Okay" 2010-02-15
By D. Dougherty
While this grip works as advertised,it is not comparable to the Nikon MB-D10 grip. The construction is very lightweight plastic and the fastener for the battery trays is fairly loose. This unit will not stand up to the type of rigorous use the D300/700 were designed for, but if you use it gently, this grip will perform fairly well.



For the price, I got what I expected. Had I been looking for a true MB-D10 alternative, I would have been disappointed.

Customer Buzz
 "good idea gone bad" 2010-02-07
By Penn Gname (MA, USA)
The Zeikos battery grip does provide the controls needed to shoot vertical. It also provides the camera's power while the battery it contains is charged. However, once the grip battery dies, you're dead in the water. Despite the fact that my Nikon D300 menu options are correctly set, the grip does not allow the camera's internal battery to take over. When the grip battery dies, the camera shuts down. At that point you either change/charge the battery in the grip OR remove the grip and use the battery in the camera. Either way, the grip has become, basically, an expensive and inconvenient extra battery holder. I can keep an extra battery in my bag for a lot less money and swap it in my camera with a lot less hassle.



I wrote to Zeikos customer service for a fix I was told they couldn't help me - I needed to read my camera manual. Not a lot of help there.



If you are considering this Zeikos grip, be aware that all you are buying is an adapter to shoot vertical. Even then, think about what you'll have to do to remove it when the battery dies (tripod adapter? camera connection cover? etc.) before you decide if it's worth it.



I'll be returning mine.

Customer Buzz
 "Zeiikos Battery base for D700" 2010-01-23
By wbs (Alaska)
Ordered Zeikos base on November 24, 2009. I have only a couple of hundred shots on the camera. Today, my camera was not functional, indicating a low battery. I replaced the battery in the camera and in the Zeikos battery base, and it still indicates low battery, and will not function at all unless I remove the battery base. The battery used in the base indicates 98% when placed directly in the camera and not using the base. This is furnished by DB Roth. They indicate they have a "no return" policy due to low prices, and that I need to deal directly with the manufacturer. I sent an email (January 24, 2010)requesting a refund and an RMA, anyway. We will see what happens next week.



UPDATE: DB Roth offered a refund, minus shipping costs, minus 10% restocking fee (it doesn't work, what is to restock?) They claim it was almost three months old (61 days from time of order placed until time of complaint email.) I said that did not seem reasonable, so they gave me the Zeikos web site address. Also the technical details on this page are INCORRECT. The battery base DOSE NOT hold two batteries. It holds ONE battery, and the other is in your camera in the camera battery holder. Then you must specify in the setup which battery you want to use first.



I buy a lot of aftermarket items. This is the first one I have been burned on. I would recommend you do not buy this one.

Customer Buzz
 "Great device" 2010-01-10
By Ian Duncan (LA,CA)
I'm not sure what the Nikon version has that this doesn't but I did not regret buying this product one bit. I really though the build quality would not be there, but it is.

Customer Buzz
 "No doubt about it!" 2010-01-08
By Elaine Brisson (Merrimack, NH)


After carefully going over all of the reviews, I purchased the Zeikos battery grip for my Nikon D300S. The camera immediately recognized both the new grip and the EN-EL3e battery. After performing a series of "does it work" functions, I am happy to report that all of the battery grip functions worked perfectly with the camera. Overall, the grip did not add any significant weight to the camera but it did significantly INCREASE THE STABILITY of the camera while in the handheld mode. The exterior of the Zeikos battery grip is a perfect match for the D300S and I suspect it would fool the eye of even the most seasoned pro.



If you are considering the purchase of this accessory for your camera, do not hesitate! There is no doubt in my mind that you will both appreciate and enjoy your decision.


Images Product

Buy Zeikos ZE-NBG300 Battery Power Grip for Nikon D300 & D700 Now

Zeikos ZE-LCH1 Lens Cap Keeper

Buy Cheap Zeikos ZE-LCH1 Lens Cap Keeper


Buy Low Price From Here Now

The perfect way to keep track of your lens caps. A small button tapes onto the front of your lens cap and the elastic loop goes around the barrell of your lens so that your lens cap always remains attached, hanging from the lens. Never lose a lens cap again!
Readmore

Technical Details

- Never lose your lens cap again
- Convenient
See more technical details
Customer Buzz
 "Lens cap strap [With modification}" 2010-01-07
By Joseph P. Portas (Elbert Colorado)
Works a promised with one exception:

Strap [just a stretchy cord] is too short for a lens longer than a standard lens.

I bought it for my NIKON D90 with 18-105 lens .... worked fine for a while but broke the cord after a month of use.

If the cord were longer I'm sure it would not have broken!

Easy fix ........ I replaced the 'cord' with a much longer 1/8" black ribbon from my wife sewing supplies.

Can remove the metal clip at the 'lens barrel' area with needle nose pliers and the 'dot' decal comes off easy

on the 'cap end' so you can rethread any length cord you want. Just make knots at the cap end and the lens end so

the keeper is secured. Works great ....... no tension on the keeper!



Then again just buy another "Keeper" they are so cheap!



Joe

Customer Buzz
 "So far so good" 2010-01-06
By songalex (Mexico,Mexico)
I purchased two one for a 58mm lenses and one for 77mm lense I was afraid that it breaks when i put it to the bigger lenses so i did with care trying not to open it to much to get inside, also I cleaned the surface with cleaning clothes trying to avoid the loss of sticking.

And so far none of the defectives or quality issues of other reviews have happened, remains one piece, remains attached to the cap keeper.

the cap keeper is cheap, but i leave the cap dangle with no extra care, i put and remove the cap often on my 77mm lenses because i have not buy the protection filter and it remains on good shape, no signs of warning.

I recommend the product, but i took the other reviews in mind on "my instalation instructions"

Customer Buzz
 "Do Not Buy" 2010-01-03
By JJO (Tallahassee, FL United States)
I received this lens cap keeper as part of a package when I bought my digital SLR. I have been using it for a month and a half (once a week or so), and today I looked down while taking pictures and my lens cap was gone! There was just an empty lens cap keeper dangling from my lens. I do NOT recommend this product. I have emailed the manufacturer to see if they'll replace my Canon lens cap. I don't want another one of their lens cap keepers because they don't do what they're supposed to do.

Customer Buzz
 "Lens Keeper that may not keep" 2009-12-25
By SJ
On day 2 the disc you place on the lens cap separated and the strap hung loose with half the disc on the end; the other half still on the lens cap. The disc is made from 2 discrete halves. I superglued both halves together and this had held. With this huge exception strap is fine. .

Customer Buzz
 "Extra Glue" 2009-12-17
By Bill T. (Independence,Ks)
After reading about the lens cap not sticking to the cap keeper. I decided to use some black 3M Weather Strip Adhesive to help things out. So far it has worked great


Images Product

Buy Zeikos ZE-LCH1 Lens Cap Keeper Now